+- MacResource (https://forums.macresource.com)
+-- Forum: My Category (https://forums.macresource.com/forumdisplay.php?fid=1)
+--- Forum: Tips and Deals (https://forums.macresource.com/forumdisplay.php?fid=3)
+--- Thread: Help configuring G4/500 as a local fileserver (/showthread.php?tid=15777)
Help configuring G4/500 as a local fileserver - smacks - 07-25-2006
I'm adding another workstation to my LAN, and the locals here have convinced me to stay away from a NAS and turn my old G4/500 into a fileserver.
1. Should I consider a Gigabit Ethernet PCI card for this machine? It will be serving up files up to 150 MB. I have a GigE switch already...
2. Would it help to get a SATA PCI card to upgrade the drives inside this server? I'd like the flexibility of being able to move these drives to my G5 should the need arise...
or should I just leave it and go with additional IDE/ATA drives?
This machine will be serving files up to 150 MB, and there will usually be 2-3 other workstations accessing files at the same time.
TIA,
J
Re: Help configuring G4/500 as a local fileserver - The Grim Ninja - 07-25-2006
Sawtooth G4s don't really benefit from Gig-E cards. Something in their architecture doesn't take advantage of the speed.
If you really wanted a speed boost, you would upgrade to a Gig-E or better G4. As things are, adding speed enhancement devices will give lackluster results compared to current speeds.
Re: Help configuring G4/500 as a local fileserver - C(-)ris - 07-25-2006
Your G4 500 might already gave gigabit ethernet. If it doesn't I would get the card.
I would go for SATA drives if you are buying new ones. No sense buying drives that are old technology. Being able to have a backup machien for the drives is definitly something to consider. Since you have a G5 SATA makes even more sense. If there is a hardware failure on your server you can move the drives and the SATA card to the G5.
Re: Help configuring G4/500 as a local fileserver - mattkime - 07-25-2006
I'd go with a SATA card. That machine doesn't support drives larger than 128 GB so you definitely need a card of some kind.
As for the gigE card - should be worth the $20. Try to make sure that your switch supports jumbo packets as it greatly increases transfer speed.
Re: Help configuring G4/500 as a local fileserver - C(-)ris - 07-25-2006
[quote mattkime]
As for the gigE card - should be worth the $20. Try to make sure that your switch supports jumbo packets as it greatly increases transfer speed.
I believe the switch and ALL machines on the network must support jumbo packets for it to work. That includes printers.
Re: Help configuring G4/500 as a local fileserver - smacks - 07-25-2006
Thanks for the tips - Most PCI GIgE cards I've found don't mention Mac compatibility, with the exception of the Sonnet Presto (about 80 bucks, shipped)
Anybody know of a cheaper solution?
Cheers, J
Re: Help configuring G4/500 as a local fileserver - mattkime - 07-25-2006
>>I believe the switch and ALL machines on the network must support jumbo packets for it to work. That includes printers.
Ahh....interesting. I did some research. Looks like devices that support IEEE 802.1Q can communicate between eath other with jumbo frames and other devices with normal frames.
the $18 card here supports it...
http://forums.macresource.com/read/1/138515
Re: Help configuring G4/500 as a local fileserver - mattkime - 07-25-2006
>>Looks like devices that support IEEE 802.1Q can communicate between eath other with jumbo frames and other devices with normal frames.
Bah, further research reveals that its a pain to set up.
You're right.
Re: Help configuring G4/500 as a local fileserver - ka jowct - 07-25-2006
Sawtooth G4s don't really benefit from Gig-E cards. Something in their architecture doesn't take advantage of the speed.
I put a gigE card in mine, and found that it made a noticeable difference. The card was only about $20 (Hawking).