+- MacResource (https://forums.macresource.com)
+-- Forum: My Category (https://forums.macresource.com/forumdisplay.php?fid=1)
+--- Forum: Tips and Deals (https://forums.macresource.com/forumdisplay.php?fid=3)
+--- Thread: OT: Anyone used tung oil or Waterlox on oak floors? (/showthread.php?tid=7538)
OT: Anyone used tung oil or Waterlox on oak floors? - Dennis S - 03-21-2006
I'm leaning toward Waterlox on new solid 3/4" oak floors instead of polyurathane. Has anyone had any experience with either? I think Waterlox has some advantages over the old-fashioned pure tung oil.
I have ruled out prefinished or laminated flooring.
http://www.waterlox.com/
Re: OT: Anyone used tung oil or Waterlox on oak floors? - Panopticon - 03-21-2006
I wouldn't use pure tung oil on floors. Very high maintenance. However, it's really nice on fine furniture, musical instruments, etc.
The Waterlox is a good alternative for real oak. Hopefully, you have oak with a smooth surface (closed grain) and will get a smooth surface.
Re: OT: Anyone used tung oil or Waterlox on oak floors? - Buzz - 03-21-2006
you can't (or shouldn't) go wrong either way. the softer the wood, especially for floors, the more advantage a Waterlox (resin) type tung oil has. oak can be pretty hard, and if the floors aren't going to be abused you could probably get by w/ either. the pure stuff is fabulous to work with (at least it used to be up till a dozen, or so, years ago when my woodworking capabilities deteriorated to no longer be viable hands on) as it provides almost infinite application and finishing options. high traffic bodes in favor of Waterlox. stay away from urethane if any stain is involved, or if you evr plan on refinishing the floors at a later date. good luck, enjoy, and stay dust-free...