Posts: 5,050
Threads: 1,022
Joined: May 2025
Reputation:
8
The stuff I used before had hydrogen peroxide in it.
Posts: 68,347
Threads: 17,223
Joined: May 2025
…..you smelt it…….you dealt it…….????
Posts: 52,255
Threads: 2,802
Joined: May 2025
Reputation:
2
How do I apply to the hardwood floors?
First try cleaning a small hidden spot that will never see the light of day, or that you won't care if it did.
I think 12% is too strong to work with, if the spot will ever show.
If not, ok.
But it's more common to use 3% diluted with water, and it would give you more time to work, and be less harmful to tissue.
Even 3%, undiluted could damage wood to some degree.
But if it's normally covered by carpet, then any damage shouldn't matter.
As far as application, you could scrub the floor with a towel soaked in the H2O2, or do something I do with bleach - put a couple layers of paper towel down and carefully pour H2O2 on it and let it sit.
You don't want anymore on the paper towels that will run off on to the floor.
I'd guess you could apply it pretty much the same way you did with the Bona PowerPlus.
If you decide to go with 12%, be really careful.
Just for drill, I'd wear eye protection.
Should a bottle slip and bounce, even a little splash in an eye or two could put a damper on your day.