09-12-2014, 12:45 AM
chopper,
I think that model has three motors and not belts. I have a GX220D that is older and has three motors. I would pop the back off and gently vac out the cobwebs and try not to touch any wiring.
You can usually find the info on your machine on the web.
As for software, old Toast versions 6-9 with spin doctor are simple and work well.
Take a que tips and rubbing alcohol and clean all the "pathway" that the tape will go. Including the heads. The head cover will lift off, look for screws.
Add some headphones and play a tape.
Note: the counter will have a rubber belt and will not work. It's not really need with modern software.
Keep us posted on the results.
I think that model has three motors and not belts. I have a GX220D that is older and has three motors. I would pop the back off and gently vac out the cobwebs and try not to touch any wiring.
You can usually find the info on your machine on the web.
As for software, old Toast versions 6-9 with spin doctor are simple and work well.
Take a que tips and rubbing alcohol and clean all the "pathway" that the tape will go. Including the heads. The head cover will lift off, look for screws.
Add some headphones and play a tape.
Note: the counter will have a rubber belt and will not work. It's not really need with modern software.
Keep us posted on the results.