09-25-2019, 08:07 PM
Here's what I would install. Remove the existing handle and remove the latch portion. Reinstall the handles as before.
Now you need a closet door ball catch. The kind with the ball unit screwing into a mounting plate. On the jam you replace the jam plate with new one included in the set.
Fitting you might need glue and toothpicks. Then adjust the ball unit for that just perfect push on the attic handle for success.
You put a shower grab bar on the upside vertically to close from above. A 32" one goes for about $20. It should work as a push bar to open on the way down.
https://www.amazon.com/KINGSO-Bathroom-B...and%2Bgrab&qid=1569437018&s=hi&sr=1-20&th=1
Now you need a closet door ball catch. The kind with the ball unit screwing into a mounting plate. On the jam you replace the jam plate with new one included in the set.
Fitting you might need glue and toothpicks. Then adjust the ball unit for that just perfect push on the attic handle for success.
You put a shower grab bar on the upside vertically to close from above. A 32" one goes for about $20. It should work as a push bar to open on the way down.
https://www.amazon.com/KINGSO-Bathroom-B...and%2Bgrab&qid=1569437018&s=hi&sr=1-20&th=1