05-09-2008, 08:51 AM
Drywall would handle that curve fine and could be done with two sheets. Just frame up the wall and put the bottom sheet against the curve, apply pressure at both ends then screw both ends into place at the same time (you'll need a helper). I'd put 4-5 screws in each end and then 3 into each interior stud. Repeat with the upper level. Use the left over 2' ends to make wall caps if needed.
skim the nail heads and spray the texture (you can buy aersol texture cans at Lowes or HD, you'l need 4-5. Let dry, then paint.
skim the nail heads and spray the texture (you can buy aersol texture cans at Lowes or HD, you'l need 4-5. Let dry, then paint.