07-25-2009, 12:16 AM
It's easy, just be patient with your level, get the positioning right, and make sure you line up the bolt holes in center of the studs.
Instead of routing wires through the walls, I bought a couple of these, trimmed them to the proper size, then painted them the same color as the wall and floor moulding, then ran all the wiring through them. Next to invisible:
http://www.homedepot.com/webapp/wcs/stor...reId=10051&langId=-1&catalogId=10053&productId=100657474&N=10000003+90001+501174
Instead of routing wires through the walls, I bought a couple of these, trimmed them to the proper size, then painted them the same color as the wall and floor moulding, then ran all the wiring through them. Next to invisible:
http://www.homedepot.com/webapp/wcs/stor...reId=10051&langId=-1&catalogId=10053&productId=100657474&N=10000003+90001+501174