04-12-2010, 08:08 PM
I also have a 10v and did the upgrade shortly after receiving it. The machine went back without any issue. It is a bit daunting to tear it apart. I used a couple of videos on YouTube and watched them through before and during the upgrade and it helped alot compared to just using the Dell service manual.
I also installed a BT module but you don't have to do now if you don't have one. You can do that upgrade later and it is not as invasive as the RAM upgrade. I use a BT mouse, so I wanted to install it and not have to use a USB port for a BT USB adapter but I think it comes down to personal preference.
Good luck!
I also installed a BT module but you don't have to do now if you don't have one. You can do that upgrade later and it is not as invasive as the RAM upgrade. I use a BT mouse, so I wanted to install it and not have to use a USB port for a BT USB adapter but I think it comes down to personal preference.
Good luck!