12-18-2008, 04:36 AM
"I suppose if I put a continuity tester across the two pins and get no Circuit, it may be bad?"
Yep that would tell you if the bulb is bad. You might also have to measure voltage on the socket
to make sure that the transformer is good too.
MR8 12V10W
MR8 is the bulb type and it is 12 volt and 10 watt so you shoild have 12 volt at the socket.
It shouldn't be too hard to find a replacement - here's a quick search http://www.bulbman.com/index.php?main_page=index&cPath=5171_6331
Yep that would tell you if the bulb is bad. You might also have to measure voltage on the socket
to make sure that the transformer is good too.
MR8 12V10W
MR8 is the bulb type and it is 12 volt and 10 watt so you shoild have 12 volt at the socket.
It shouldn't be too hard to find a replacement - here's a quick search http://www.bulbman.com/index.php?main_page=index&cPath=5171_6331